16 bit intensity really 8 bit?
I have some 16 bit capable fixtures which have channel 1 and 2 for intensity. I hoped to get some nicer smoother slow fade ups (at least to the capability of the fixture) by switching to 16 bit mode, but I don't seem to be getting a true 16 bit. So to follow, I bring the fader for the fixture to 100% then store to a playback. I then go into the setup for the playback, raise and lower tab then change the raise time to, for example, 255 seconds.
When I watch the dmx output, I would expect to
Hi @Neil Macmillan
I had a play with my FLX (ZerOS 8.0) and a Cameo Q-Spot 40 which has 16-bit dimmer. The fixture definition was written by myself.
I use the Z key to access the DMX Outputs tab to look at the DMX values sent to the fixture on addresses 1 and 2 where the fixture MSB and LSB intensity channels sit.
If I use the channel fader to manually play with the intensity, at 0% I see 0/0 (MSB/LSB). As I move the fader up the LSB goes to 128 and the MSB increments. When I get
