bruce1045 Posted February 1, 2012 Report Share Posted February 1, 2012 Hi, We currently have a leap frog 48 with eight Betapack 3 dimmers connected. While rigging/patching today, something went wrong... we think a DMX spike and 3 of the eight dimmers will not to anything, the screen is completely blank and so is the 'DMX OK' light even though DMX is connected. But when fixtures are connected to the dimmer they will come on at full intensity but there is no control via the controller or the dimmer... Any ideas what to do? Thanks Quote Link to comment Share on other sites More sharing options...
KWR88 Posted February 2, 2012 Report Share Posted February 2, 2012 Think i spoke to you earlier this morning but the details are slightly different to what we talked about on the phone. If this was not you then please contact me on the address below. Quote Regards, Keith Rogers keith.rogers@signify.com DD: +44 (0) 1633 833 101. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.