Hi,
I have built a Artnet controlled LED torch for our upcoming production. At the moment it is controlled by 8 DMX channels sent over Artnet to an ESP8266.
If someone is interested: https://github.com/martin-144/ArtNetLed
My problem is now that I have a DMX channel which controls the burn height of the flame on my torch. I would like to have a fader to control this single channel,
which is at the moment located in the Beamshape section of my fixture definition. Could someone point
Hi together,
today I managed to fix the problem. It was neither the FLX console nor my Artnet device. It was the Access point in between (TP-Link TL-WR802N).
For some unknown reason the DHCP lease time was set to one minute, which is of course very short and shouldn't be that short.
Setting it to a more reasonable time (like 120 minutes, which is the default) solved the problem.
Just wanted to let you know if you may run into similar problems...
Martin