Jump to content
Vari-Lite Controls Support Forum

Test mode on FLX-S


delicolor

Recommended Posts

I recently obtained a 2nd user FLX-S 24 to use as an unskilled user alternative to our aging Leapfrog 48. I upgraded it to 7.9.9 ok but noticed a couple of oddities with a show file so checked it out in test mode and found three of the faders were non-linear (one of which doesn’t go all the way down to zero which is a real pain in channel mode). I’ve deployed the compressed air but the behaviour is the same so I’m in discussions with the vendor for spare parts. (I see 45mm pots are an orderable item on the spares tab).
 

Anyway, on trying out the “Other Test” RDM loopback and NVR tests don’t appear to do anything (other than save your show warning on NVR).

Is this normal behaviour on a FLX S? I know the tests work fine on the Leapfrog and assume it is generic across the range build as there are other tests there not supported.

One more item to mention- the upgrade tool on the website is offline, I took a look to see how much it would be. I expect we will upgrade in due course but can cope with 512 channels over 2 universes for now…

Link to comment
Share on other sites

Hello,

50 minutes ago, delicolor said:

noticed a couple of oddities with a show file so checked it out in test mode and found three of the faders were non-linear (one of which doesn’t go all the way down to zero which is a real pain in channel mode). I’ve deployed the compressed air but the behaviour is the same so I’m in discussions with the vendor for spare parts. (I see 45mm pots are an orderable item on the spares tab).

The physical fader positions should be mimicked exactly on the front panel display on the touchscreen. If the on-screen faders don't match the physical faders, and compressed air doesn't solve the issue, the console will need to be serviced.

52 minutes ago, delicolor said:

Anyway, on trying out the “Other Test” RDM loopback and NVR tests don’t appear to do anything (other than save your show warning on NVR).

Is this normal behaviour on a FLX S? I know the tests work fine on the Leapfrog and assume it is generic across the range build as there are other tests there not supported.

FLX S consoles use an entirely different architecture to the x86 Leapfrog, so these differences are nothing to worry about.

53 minutes ago, delicolor said:

One more item to mention- the upgrade tool on the website is offline, I took a look to see how much it would be. I expect we will upgrade in due course but can cope with 512 channels over 2 universes for now…

The online Universe Upgrades are temporarily unavailable whilst we migrate our systems. Please drop me an email if you’d like to proceed, so we can advise the best procedure during our migration.

If you have any questions let me know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.