SimonH Posted September 18, 2022 Report Share Posted September 18, 2022 I’ve just received my new gateway 4 and in the introduction it says it can be configured from the board or alternatively via a browser but in the configuration section there is no mention of setting it via the board. Am I missing something? Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted September 18, 2022 Report Share Posted September 18, 2022 Hi Simon, 3 hours ago, SimonH said: I’ve just received my new gateway 4 Really pleased to hear you now have a Gateway 4. For information on configuring Gateway 4, please see the link below... https://www.zero88.com/manuals/gateway4/configuration-2 For information on configuring Gateway 4 from FLX, please see the link below... https://www.zero88.com/manuals/zeros/setup/devices/art-net-devices Let me know if you have any questions. Edward Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
SimonH Posted September 19, 2022 Author Report Share Posted September 19, 2022 Thanks yet again Edward. perhaps a line in the instructions sent out with the unit should say please consult zeros manual for configuration on a console? Quote Link to comment Share on other sites More sharing options...
SimonH Posted September 19, 2022 Author Report Share Posted September 19, 2022 Hi, ok used dmx workshop to change the IP address to 192.168.15.200 and now cannot see it anywhere. The instructions on here say to return to factory settings press reset button and cycle power but there isn’t a reset button or any button for that matter. help please. Quote Link to comment Share on other sites More sharing options...
kgallen Posted September 19, 2022 Report Share Posted September 19, 2022 Is the .15. part compatible with your mask setting? I guess you’ll need 255.255.0.0. Quote Link to comment Share on other sites More sharing options...
SimonH Posted September 19, 2022 Author Report Share Posted September 19, 2022 Thanks for the reply. I’ve sorted it now, my fat fingers had typed the wrong ip. still like to know where the reset button is though. Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted September 19, 2022 Report Share Posted September 19, 2022 Hi Simon, 7 hours ago, SimonH said: The instructions on here say to return to factory settings press reset button and cycle power but there isn’t a reset button or any button for that matter. As the Gateway 4 supports LLRP, we have hidden the Reset button away, to try and avoid people using it. If you must reset the Gateway 4, there is a secret hole down the outside of one of the XLR connectors, which a pin can be inserted into to reach the reset button. If you have any questions, please let me know. Edward Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.