simzee47 Posted October 20, 2022 Report Share Posted October 20, 2022 Hi All, We use a FLX48S desk. We output DMX through 5 pin socket on rear of desk, through our rack of dimmers then on out onto stage for on-stage fixtures. Can the desk act as a DMX Splitter so that we keep the 5 pin output for the dimmer rack, then terminate and then use the 3 pin output to feed on-stage fixtures? It only has one universe. Dave Quote Link to comment Share on other sites More sharing options...
kgallen Posted October 20, 2022 Report Share Posted October 20, 2022 Yes. In Setup make both outputs Universe 1. Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted October 21, 2022 Report Share Posted October 21, 2022 Hi @simzee47 As @kgallen says, you can configure the console so that both outputs send Universe 1. To do this, in SETUP -> Universes -> Desk Universe 1, click Add under DMX, and then add port 2. More information here… https://www.zero88.com/manuals/zeros/setup/universes/desk-universes Hope this helps. Edward Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
simzee47 Posted October 21, 2022 Author Report Share Posted October 21, 2022 Thanks Both, I'll set this up next time I'm at the desk. Dave 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.