Select your language
Configuration & Settings



Preheat can be selected on a per channel or all channel basis. The preheat level is 5% and cannot be adjusted.

Select ‘Preheat’ by cycling through the modes using the ‘Mode’ button.

Select required channel or ‘A’ for all channels, using the ‘Up & Down’ Arrows and press ‘Enter’, to confirm. 

Now select on/off using the ‘Up & Down’ Arrows. Press ‘Enter’ to confirm and return to the channel selection.

Note that Preheat is only applied if there is a DMX input present, and the law is not set to ‘Switch’.