User Interface
Manual Control
Select the Manual Control option from the top level menu options, and press the ENT key to enter the Manual Control menu. The following options are available:
Use the cursor keys to scroll between the options. Press the ENT key to enter the menu for the selected option.
Channel: xx
Level: xxx
The cursor is shown in the Channel field.
ChilliNet mode
When operating in ChilliNet mode, the screen shows:
A (xx) Channel: xx
Level: xxx
The cursor is shown in the Channel field.
The area number A(xx) shows the area that the dimmer channel is assigned to and is for information only.
In both Standard and ChilliNet modes, individual channel levels can then be adjusted using the numeric keypad or cursor keys. Press the ENT key to move between the Channel and Level fields.
The # key can be used as a quick method of setting the manual control levels to full or off. The first push will take it 100%, the second push will take it 0% etc.
All Channels
Level: 0
ChilliNet Mode
In ChilliNet mode you can set a manual control level for all the channels in a specified area on the dimmer in a single operation.
Select the Set All Chans option from the menu, and press the ENT key. The screen shows:
Area: 1
Level: 0
The cursor is in the Area field. Press the ENT key to move between the Area and Level fields. The area number must be valid (i.e. the dimmer has one or more channels assigned to that area) to adjust the Level field.