This option is only available when the dimmer is in ChilliNet mode.
This option allows you to assign each of the dimmer channels to an Area (1 - 10).
Dimmer channels may be assigned individually or all the dimmer channels may be assigned to the same area. This allows you to playback memories and sequences across the network on an area basis.
Select the Area Control option from the top level menu options, and press the ENT key to enter the Area Control menu.
The following options are available:
The cursor is in the Channel field. Press the ENT key to move between the Channel and Area fields, and adjust the values using the cursor keys and numeric keypad.
Repeat operation for each channel.
Use the numeric keypad or cursor keys to enter the required area number (1-10) and then press the ENT key.