Set Start Address
This option allows you to set a DMX start address for the dimmer.
The range for the DMX start address for the Spice dimmer is 1 - 501.
The dimmer channels are then patched automatically as a contiguous block starting at the specified address.
Select the Set Start Address option from the menu, and press the ENT key. The screen shows:
Enter the DMX address using the numeric keypad or cursor keys, then press the ENT key.
This sets the start address for the dimmer. The screen pauses briefly and then returns to the DMX Controls screen.
Pressing ESC on this screen leaves the current DMX address unchanged and return to the DMX Controls screen.