Groups
Copying & Moving Groups
Groups can be copied or moved using syntax. Copying is particularly useful if you have a group, that you would like to duplicate, so that you can use it as a starting point to build a new group, rather than starting from scratch. Moving is useful if you would like to reposition your group tiles in the Groups window.
Copying
The syntax can follow "Group x Copy y Enter", where x is the source group, and y is the destination. There is no need to tap group again before y, however this is allowed.
Examples of copy syntax below:
Group 1 Copy 6 Enter
Group 1 Copy To 6,
Copies group 1 and pastes it to group 6.
Group 1 0 Copy Group 2 Enter
Group 10 Copy To Group 2,
Copies group 10 and pastes it to group 2.
Moving
The Move command can be accessed, by repeating the process above, however holding the Shift key when tapping Copy. The syntax is therefore "Group x ( Shift- Copy ) y Enter", where x is the source group, and y is the destination. There is no need to tap group again before y, however this is allowed.
Examples of move syntax below:
Group 1 ( Shift- Copy ) 6 Enter
Group 1 Move To 6,
Moves group 1 to group 6.
Group 1 0 ( Shift- Copy ) Group 2 Enter
Group 10 Move To Group 2,
Moves group 10 to group 2.