Groups can be named by holding Setup and pressing the Group on the touchscreen. An onscreen keyboard will then be displayed to type the group’s name. Press OK to confirm.
On FLX, Groups can also be named using syntax by typing one of the following commands:
Group 2 0 7 Name
This displays an onscreen keyboard to name Group 207
Name Group 5 Enter
This displays an onscreen keyboard to name Group 5
Name Group touch an empty group
This displays an onscreen keyboard to name whichever group you touch on the touch screen. You do not need to press the “group” button if the groups window is already displayed. An onscreen keyboard will then be displayed to type the group’s name. Press Enter or OK to confirm.
In the same way as when recording, if the Groups window is already displayed on the internal monitor, just tap a group after pressing the Name button to name that group.
Groups can also be named at the point of recording. For example:
1 Thru 6 Record Group 2 0 Name
1 Thru 6, Record Group 20 Name,
This would record fixtures 1 thru 6 into group 20, and the on-screen keyboard will pop-up for you to use, or use a USB keyboard to give a name. Press enter to save.