Fixture Schedule
Syntax
On FLX, syntax can be used in the fixture schedule to select, readdress, and also delete fixtures.
Syntax addressing
When readdressing fixtures, the syntax format is fixture number @ address Enter:
1 @ 2 7 4 Enter
1, @ 274
“Fixture 1” will be patched to DMX address 274 on Universe 1.
A specified universe can be defined by adding the universe number before the start address, separated by a point:
1 @ 2 . 1 5 6 Enter
1, @ 2. 156
“Fixture 1” will be patched to DMX address 156 on Universe 2.
Group Patching is performed sequentially from a given start address. This results in all of the fixtures of this type being assigned one after another starting at the address you define. For example:
Group 1 @ 3 . 1 Enter
Group 1, @ 3. 1
The first fixture in Group 1 will be patched at DMX address 1 on Universe 3. All other fixture start addresses will increase sequentially until the whole group has been patched or the universe is full.
Syntax Deleting
5 Delete
5, Delete
Fixture 5 will be permanently deleted
1 0 Thru 1 5 Delete
10 Thru 15, Delete
Fixtures 10 through to 15 inclusive will be permanently deleted.