[DMX patching not saving.]

5 hours ago, Jon Hole said:

Error 003 suggests the battery is still not happy.

Try reseating the battery, or trying a different one. After doing this, ensure you do a reset of the console.

More info here: http://support.zero88.com/975061181

Thanks Jon. I'll try that. i did wonder if that battery was "in" right. 

[DMX patching not saving.]

UNscratch that!

Next morning.... plug in again, and All patch memories are gone, and we're back to all DMX's = Ch1

plus Err 03 when starting up.

Pressing enter happily gets rid of that, and repatchng is fairly easy, but a pain to have to do every time. What am I doing wrong??

Any help welcomed

[DMX patching not saving.]

Ok. Scratch that. Just reset the desk and it seems happy. Job done. methinks. Thanks y'all. 

 

[DMX patching not saving.]

Hi folks. 

I've just picked up a 2nd hand Jester.  I'm a newbie to Jesters, and indeed a newbie to lighting controllers generally. 

It was sold to me as needing a new memory battery. I replaced this. 

The channels were not set to the corresponding DMX addresses.  Instead:   DMX 1 = Ch 1     DMX 2 = CH 1      DMX 3 = Ch 1 etc  ALL DMX's = Ch1.

So... I re-patched as per the manual (I thought).

I unplugged. 

Next day the clock and date all good, but when I plugged back in I notice all  DMX's again = Ch 1. 

It Hadn't saved. 

Must I press another button other than "OK" to get the re-patched DMX's to save properly... or....??

Help please. 

Thanks