Sparky
-
Posts
22 -
Joined
-
Last visited
Posts posted by Sparky
-
-
Yes you can, from the effects palette window open the effects window and untag the tilt so only pan is assigned! Do the same for the tilt by untagging the pan!
I work usually in the same way and it works perfectly!!
-
Try this:
If necessary update to Version 4 and use the "Release" Feature in the Submaster Setup (Setup+Submaster Flash button).
If you enable this then use the submaster once - the Submaster is now present on every page until you press clear + Sub.Flashbutton, even if its position is zero.
Or else program your scene onto a memory and transfer it to the submasters!!!
-
For now they're all large but we've had a number of requests for a software option to switch the size back down to the smaller font. This is being considered for a future release.
I hope this helps,
Sorry but i really disapprove!!!! it is much clearer like this!!
-
to update the desk you need to first insert the usb in your pc, unzip the file and run the install program on your pc. Then you need to insert the usb in the desk and switch it on! Attention you need to connect a monitor cause the update instructions are only visible on the external monitor!!
-
You can set the internal time from the Special Page to your desired fade time, then press the time button together with the palette button and the transmission of the palette fades to the given time!! i personally use a fade time of 3 sec cause if i want it longer i have all the time to enter in the special page and change that time!!!
-
Hello folks,
Is it possible to change the flash button mode per fader ? So let's say, I want faders 1 to 20 flash, and 21 to 24 off/select
Maybe possible as new feature when impossible?
Thanks
No but you can leave everything to flash and use the shift+the flash buttons to select the desired fixture patched on the preset faders!!
-
Any board will work. i personally use a Juggler or a jester!!
-
Did you have smart tag switched on?
-
do you have a monitor attached to the desk?
-
i was just thinking if this could be implemented!?
-
is it possible use the dmx in to trigger certain submaster or memory cues!!??
-
Hi,
First of all great desk!
Problems i found that when flashing submasters the reaction of the button has quite a delay!
Another thing is that sometimes the fixture position and colour do not get released when submaster is at 0%, it would be great if it would work all the time :-)
Thanks
-
-
Hi
How can i update my debug with new fixture files???
-
Can the data from the dmx in affect the dimmers in HTP and not LTP?
-
Hi
when flashing submasters, why does the dimmers are inserted in the programmer?
-
Can attribues such as colour or better effects change their speed and size with the percentage given by the submaster ignoring fade times?
-
It colud be great if when clearing the attributes such as position colour and beamshape remain the same as last modified from the palettes! just th effects engine will be released.
-
Is it possible to remove the page over lay on the submasters?
-
how can i save the desired speed and drive to a chase recorded on a submaster?
How can i select fixtures pached on the preset submasters (toggle from flash to select)?
How do i change the fan mode?
And can i invert the CMY on the patch (if i've got a fixture in the rig that is in rgb mode can i just invert it from the console)?
Thanks
-
Hi
I tried to use the dmx in on both the frog 2 and the frog 48 but nothing happened!
when in the edit fixtures menu i assigned which fixtures i want in the dmx in value
e.g. Dimmer 1 dmx 1 dmx in 1 but nothing happened!
Am i missing some other step?
Thank you
Ismael
Adding a macro to control channel data
in Frog 2
Posted
You should record your smoke cues on a separate cue stack and then trigger them from your lighting cue stack by writing in the macro e.g. g2 this will trigger the go button on stack 2. etc etc