[problem]

never mind i figured it out... just have to have the brightness wheel down to zero when programming..

[problem]

ok i set up the desk in partial mode, v 10 super user, program mode set to channel..

 

now i start to program a chase with the intels..i can select and deselect parameters to use for the 1st step, program it, then go to the 2nd step and i cant select or deselect any of the parameters??

 

Is it just me? or is it the desk?

 

thanks in advance..

[can i move only dmx channel of brightness to fader]

now is that brightness you are referring to using the brightness button or the parameter of the light itself by using the shutter wheel?

 

right now as far as i can tell you cant use the brightness button to make individual lights have different brightnesses using the brightness button on the frog board..

[Brightness chase on the fat frog]

i am going to upgrade to vers 10, and do it with the wheels... I figured that was all there was to it. Just wanted to make sure is all..

 

Thanks for the info.

 

 

..........

 

 

i cant just use the brightness button to and then use the wheels to do the chase? i have 4 518 martins and 2 robe spot 250s. Without having the lights in front of me, i am doing this on the fly..should be easy enough to make the chase and then putting it on a submaster without having a light hooked up??

 

Wish there was some kind of visualizer made for the frog board..that would be the cats ass!

 

sorry back to topic now

 

 

..........

 

 

took me a while to get the hang of doing it without the lights in front of me but i got it now thanks again..

[Copying Fixture Data]

wow this is cool, i didnt know this, i will try this at my show tonight!!

 

this would save me tons of time!!

 

pays to read the posts i guess eh?

[Brightness chase on the fat frog]

Hey guys long time lurker here..

 

I have a question, if i have say 4 intelligent fixtures, and i want to chase the brightness on them how would i go about doing that?

 

For example i want em all dark all the time

then chase the brightness on fixture 1, then to 2 then to 3 and so on..

 

so the beams look like they are chasing..

 

We have ver. 9.4 and since need to upgrade to 10.4.. do we need 10.4 to accomplish this?