glenhirst Posted December 10, 2003 Report Posted December 10, 2003 hi there, Recently started at new theatre and have just tried to upgrade our Illusion 120 to version 7. Got a error message: Checksum Incorrect Desk ID 3 is invalid System terminated Now this desk won`t boot up, just asks for an upgrade disk and when I put that in and boot again I get back to the system terminated stage. Any ideas? Bios version is 2.5.2. Maybe there was an earlier update that I needed to do first? thanks, glen.
Paul Posted December 11, 2003 Report Posted December 11, 2003 Have a look at THIS TOPIC. Also it would be useful if you could tell us the desk serial number, and what version of software it was previously running if possible. edit: fixed link
glenhirst Posted December 15, 2003 Author Report Posted December 15, 2003 serial number is 0034001 xxxxxxxx i think the software version was 2.something had seen that other post, but short of installing a new floppy drive, I have tried everything there. Success! After installing new floppy drive, same thing, but then finally tried different floppy disk and all is well. Should have tried the most obvious thing first! Moderation: serial number removed.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now