Another way to use Fan-Middle

[Transalp]

Hello!

 

Whereas I was testing the latest software-update and preparing a show that will take place in the early february I had some idea for the use of the "Fan-Middle"-function at brightness-, colour- and beamshape-attributes, but it didn't work as I imagined.

I thought about using that function for setting a colour-fan like "red-blue-green-blue-red" or a strobo-setting "slow-middle-fast-middle-slow" or brightness "100%-75%-50%-75-%-100%".

To create a position-fan it is necessary to increase the DMX-values on the one side of the middle and to decrease them on the other.

But that's not useful at the other attributes. Is it possible to change the function in the software or is one sub-programming "Fan-Middle" the basic for all attribute-settings?

[K-Nine]

The Fan-Middle editing mode works as per the design.

 

What you are describing is more of a Fan - V which I think someone has suggested before either for the Frogs or Frog 2

 

Frog Reference 5502 - New Fan V Function - Locks middle fixtures and bends the outer fixtures in the same direction.

 

Implemented in version 10.9