Fat Frog

[ET]

Hello I`ve got a problem with my Fixtures Programm. If I push the Home Button all DMX Settings go to 255.

 

 

ET :x

[K-Nine]

Which fixture type are you using ?

Is it one from the Fixture Library or one you have created yourself with the fixture editor ?

[ET]

I`m create with the fixture editor myself. It´s an showtec Explorer 250 wash.

[K-Nine]

It sounds like the default values of all your parameters have been set to 255. Normally this is NOT the case.

 

Brightness/Intensity is usually set to 255 (full).

 

Most colour and beamshape parameters normally have a default value of zero which equates to white, no gobo, no prism, shutter open etc. Please check the manual for the fixture, as occasionally parameters like shutters have a non-zero value that equates to open.

 

Pan and tilt parameters are normally set to 50% (ie 128 for 8 bit parameters or 32767 for 16 bit parameters).

 

If you could send us the DMX channel assignment data from the user manual or a link to the user manual then we can check the default values and add the fixture to our library.

 

Hope that helps.

[Kirkup_xp]

Attached is a fixture profile for the Explorer 250 Wash created from the user manual. Try this and let me know if there are any problems with it.

 

 

 

 

Peter

[ET]

Thank you for Help, The Fixture Parameters was wrong. It`s OK.

The Fixture from Kirkup_xp is OK.

 

Thank you very much for the fast Help