dogcop Posted September 28, 2007 Report Posted September 28, 2007 Hi there I have a sunstrip active- basically 10 halogen blinder effect in one. I have created a chase whereby 1st 2 lights come on, then off and 3rd and 4th come on etc etc - and this chase runs ad infinitum. When i run it from the memory stack it works every time. I have transferred it to the submasters and tried both with and without time. However every time I run the chase from a sub the 1st 2 lights come on and thats it - no chase I go back to memory stack again and all works fine Any ideas ???? Andy
Kirkup_xp Posted September 30, 2007 Report Posted September 30, 2007 Hi Andy Do you have a speed set on the chase? or are you manually overriding it using the speed pot? Do you have a show file you could email me, with the problem submaster? pkirkup@zero88.com Also, what software version are you running - this could help us find out if this is an old bug which may have been fixed in a later version. Thanks Peter Kirkup
dogcop Posted October 1, 2007 Author Report Posted October 1, 2007 Hi Peter I have now mangaged to solve the problem Normally when I run subs, i just press the button underneath the fader hence the no chase!!! Push up the fader and voila - mucho embarresssment note to self - try the leedin obvious first !!!! thanks for your time tho' Andy
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now