Carl Ehrhardt Posted November 29, 2007 Report Share Posted November 29, 2007 It would be nice to select / deselect a fixture on the preset faders if i don't have to change the global flashsettings to off/select. So could I just press shift + flash button of the preset fader to select / deselect the fixture(s)? Also see here Adding Fixtures It would be easier if we control the brightness on the preset faders to chose the right one during a show. Thanks a lot. Quote Carl Ehrhardt Technical Director Kellerbühne St.Gallen CH-9000 St.Gallen Switzerland www.kellerbuehne.ch Link to comment Share on other sites More sharing options...
Carl Ehrhardt Posted February 25, 2008 Author Report Share Posted February 25, 2008 I have found a easy way for this. if the command line is activated I can just by entering the Ch No chose the right one and then get fast access to the Colour / Beamshape without disabling the flash function on the preset faders. Quote Carl Ehrhardt Technical Director Kellerbühne St.Gallen CH-9000 St.Gallen Switzerland www.kellerbuehne.ch Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.