Jump to content
Vari-Lite Controls Support Forum

Recommended Posts

Posted

k, we hve 6 Elation CMY zooms, 3 on each side of our balcony. the lights work on one side but do not on the other. what is the best way to test a dimmer in a dimmer rack. any help is greatly apreciated.the cmy's are hooked up to dimmers i think the dimmer is bad.

Posted
k, we hve 6 Elation CMY zooms, 3 on each side of our balcony. the lights work on one side but do not on the other. what is the best way to test a dimmer in a dimmer rack. any help is greatly apreciated.the cmy's are hooked up to dimmers i think the dimmer is bad.

 

According to the Dimmers you are using - it may be vary easy to test it via a test knob on front of your dimmer

maybe there is a test function on the menu ... unfortunatly you didnt wrote the manufaturer and type of the dimmers

or take down the desk to the dimmer rack and connect it with your dimmer set the DMX start adress to 1 and your desk to defaults then push fader 1 when the dimmers working proparly your cablig gotta some kind of error in it ...

Sebastian H.

Pro - Sound Showtechnik

The secret to creativity is knowing how to hide your sources.

Albert Einstein

"You can get a lot more done with a kind word and a gun"

Al Capone

Posted

Most intelligent fixtures should be supplied with hard power (not from a dimmer). The dimming control is then done over DMX, using mechanical shutters or other controls internal to the intelligent fixture. If you connect an intelligent fixture to a dimmer output, you're very likely to damage either the intelligent fixture, or dimmer, or both.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.