Truro College

OK - Desk set to 10%, results - ch1 lantern off, ch2 lantern about 30%, ch3,4,5 about 10% ch6 off. any adjustment to any of the pots has no effect on the lanterns at all. ?????? :?

blast... Yep 24hrs later, bad memory and testing during technical rehearsals didn't help.. Will try again.... Chris

Paul, Tried what you said. Desk channels set at 20%, trimmed ch1-2 pot so lamp's were dim glow, trimmed ch3-4 pot, this brought up levels on ch1-2 and 3-4, so trimmed 1-2 back so 1-4 same intensity, trimmed ch5-6 pot, this brought up levels on all channels, again trimmed 1&2 + 3&4 back so all channels dim glow. Went to desk, faders 100% = all lights to 100%, as I brought faders down, at 10% all lamps were off, at 0% all lamps shot back upto 100%. As a double check I moved all the pots to the same position as one of our working packs to find similiar results to above... HELP ? Chris

Thanks for the prompt reply - Will try that tomorrow and let you know... Last night I tried turning the Preheat pots all back - as in anticlockwise thinking that it would turn off the channels but no go... Will try tomorrow... Thanks Chris

Hi, One of our Betapaks is playing up, it's the DMX & 0-10V control version. Symptoms: All 6 channels are on at about 40-50% as soon as the pack is switched on, the control is disconnected, the PreHeat pots are All the way back, the override pot is full up, I can press an override to run a channel to 100% and it will fall back to the 40-50%. Any Ideas Chris