Hi,
i'm using a bullfrog with software version 9.6.1 and noticed 2 things:
1) When i program and then replay an ellipse (or other effect) on the pan and tilt from a submaster, and then look at the parameters, it doesn't say ellipse at the effect parameter. It just says no effect, even though the effect is playing. Color and gobo parameters that were stored in the same submaster are displayed on the proper values though. I first noticed this problem because i wanted to store a memory composed with submasters, and everything was recorded right except the pan tilt ellipse.
2) I recorded a memory with some fixtures in it, just a position and no effects or anything special. I then played a ellipse on the pan and tilt on the same fixtures from a submaster i programmed . Next i cleared the memory with the fixtures in it ( the memory wasn't active on the playback x or on a submaster). The result was that the effect playing from my submaster at that moment, was also cleared. I had to reload the submaster for the effect to play again.
all was done programming in partial memory mode. The fixtures used were 8x mac500
have i found 2 bugs, or am i doing something wrong?
greetz,
nighteyes