Where Are The Stars?

[RW]

This one is not a big problem but when you are in say the output window and you want to record a mem, the box comes up to show/ask what mem number, but there are no * to show the programmed mems.

[K-Nine]

This may be something to do with how the software is parsing the memory number as you enter it in the popup window, as it does not know when you have completed the memory number until you hit the ENTER key ... perhaps our Swansea Software Guru could confirm or deny this

 

I would recommend that when programming memories you have the memories screen on the monitor and that the next memory (yellow bar) is on the memory you are about to program. Once you have programmed that memory, the yellow bar auto increments to the next memory number, so all you have to do is setup the scene ... press RECORD, set up the next scene, press RECORD etc.

 

Note: You can have several windows displayed on the monitor at the same time as full, half or quarter size windows ... just check which one is active when you press the RECORD key