Patching A Fixture To Dmx 512

[Carl Ehrhardt]

Situation: LeapFrog 48, Software Version: 2.15

 

I try to patch a 1ch Scroller to MFK 1 and DMX 512. There comes a error: “Insufficient Channels in the Selected Universe to patch”

 

If I try to patch the same fixture to Channel 100 it works. Is there anything that works wrong? We have the 512er to control all our vans in the Scrollers (switch off the Van by Value > 50%).

 

Greetings

Carl

[K-Nine]

Sounds like a bug to me.

 

I have reproduced the error message here on the Phantom Frog using the 1Ch Scroller fixture from Standard Fixtures and specifying a DMX address of 512.

 

Reference: LF-1883

[Carl Ehrhardt]

Thanks and have a nice day.

Carl