Carl Ehrhardt Posted December 14, 2007 Report Share Posted December 14, 2007 Situation: LeapFrog 48, Software Version: 2.15 I try to patch a 1ch Scroller to MFK 1 and DMX 512. There comes a error: “Insufficient Channels in the Selected Universe to patch” If I try to patch the same fixture to Channel 100 it works. Is there anything that works wrong? We have the 512er to control all our vans in the Scrollers (switch off the Van by Value > 50%). Greetings Carl Quote Carl Ehrhardt Technical Director Kellerbühne St.Gallen CH-9000 St.Gallen Switzerland www.kellerbuehne.ch Link to comment Share on other sites More sharing options...
K-Nine Posted December 14, 2007 Report Share Posted December 14, 2007 Sounds like a bug to me. I have reproduced the error message here on the Phantom Frog using the 1Ch Scroller fixture from Standard Fixtures and specifying a DMX address of 512. Reference: LF-1883 Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace Link to comment Share on other sites More sharing options...
Carl Ehrhardt Posted December 14, 2007 Author Report Share Posted December 14, 2007 Thanks and have a nice day. Carl Quote Carl Ehrhardt Technical Director Kellerbühne St.Gallen CH-9000 St.Gallen Switzerland www.kellerbuehne.ch Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.