Chilli HF

[HPCTechnical]

Hi,

 

is it possible to use Chilli HF dimmers in 'mixed' formation - specifically, on a 4-channel dimmer, using one channel as a switch for non-dimmable LEDs, and the remaining 3 channels as conventional dimmers for tungsten sources?

 

Cheers,

[Jon Hole]

Hi,

 

The Chilli HF isn't a conventional dimmer, so this isn't possible.

 

Each channel consist of a relay and a low voltage output that can be globally set as either 0-10v or DSI .

 

 

Best Regards

[HPCTechnical]

Thanks Jon,

 

We only need one channel of swtiched output for the LEDs, and the waste of the 7 other channels (we have 2 x 4-channel HF racks) offends me! If I were to swap them for i variants, is there a single channel product you do that would work with ChilliNet and DMX, or would it be a cse of reusing one of the Chilli 4s?

[Jon Hole]

We don't have individual channel products unfortunately, so you'll have to use one of the 4 channel HF Chillis

[HPCTechnical]

Many thanks, Jon, your help much appreciated