Step By Step Chaser

[Huber]

Hello Friends!

 

I have a ORB XF with 7.6.0 software.

 

How can i create a simple step by step chaser with 10 lights.

If i choose the normal chaser in the effect palett with offset, the chase dont works right. (Some lights are flashing together in the effect.)

 

I want:

1. step :

1=100%, all other at zero

2. step:

2=100%, all other at zero

3.step:

3=100%, all other at zero

and so on

 

 

Greets

[Jon Hole]

Hi,

 

You can do this on a new cue stack.

 

Select a new cue stack by typing STACK x ENTER

 

Now, create 10 cues, Cue 1 with 1 at 100%, Cue 2 with 2 at 100% etc etc etc

 

Then, click 'Stack Setup', choose 'Chases' and click 'Turn into chase'. When you do this, you'll get several chase settings appear.

 

Hope this helps,

[Huber]

Ok, thanx!

I know this way, but i´d searched for an easier solution in the palettes.

 

Many greets!

[Jon Hole]

Hi Huber,

 

The 'effects' palettes and window are 'wave' based effects, whereas the 'chases' are step based effects

 

Hope that clears things up

[Huber]

Hi Jon,

 

Ok we have about 160 RGB Bulbs (Glasson DFS3000RGB), i think this is much work to programm one cue for each bulb, but many thanks yet.

 

Nice geets!

[Jon Hole]

You could create a macro that says:

 

@@ RECORD ENTER @ . NEXT

 

That would speed it up and make it very quick