terryb Posted March 26, 2014 Report Posted March 26, 2014 I have just upgraded my ML24 to v4.0 but whilst the desk said the upgrade is successful I have lost all of my LCD displays - nothing just black. As I was about to set up the board for a show this is crisis time. Anybody help?
terryb Posted March 26, 2014 Author Report Posted March 26, 2014 After reading around the forum I think I have found the answer to my own problem. It seems that during the upgrade the LCD settings were altered making the display disappear. Never had anything like that happen on an upgrade before.
Jon Hole Posted March 27, 2014 Report Posted March 27, 2014 Hi Terry, Not sure why that happened... we'll keep an eye on it. Are you ok getting the settings back? Regards Jon Jon Hole linkedin.com/in/jonhole
sopsjoer Posted April 18, 2014 Report Posted April 18, 2014 I had the same thing, altough i got an error message 036. I updated the desk again, changed lcd settings and everything was ok
Jon Hole Posted April 18, 2014 Report Posted April 18, 2014 Hi sopsjoer, the error message would have been caused by the showfile already on your console. Because of the showfile compatibility issues we had, Version 4 will give you an error, but when you press <OK> it will then fix the showfile to make it compatible. Best regards Jon Jon Hole linkedin.com/in/jonhole
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now