luke1307 Posted September 12, 2016 Report Posted September 12, 2016 Hi there, Is there a way I can use the Udks to trigger my par cans into flooding the stage in one colour while blacking out the other fixtures even if there all running a sequence on a playback?
jw-lighting Posted September 13, 2016 Report Posted September 13, 2016 1. Record a playback onto the UDK (Set your PAR cans as you like, press <Record>, press <UDK>-Button) 2. Press <Setup> + <UDK> together to configure the UDK. Select "Solo" instead of "Latch" or "Flash" 3. Enjoy
luke1307 Posted September 13, 2016 Author Report Posted September 13, 2016 Hey, Thanks for this, but I have done that, but the other fixtures stay on. Even with the Udks set at latch and not flash. Have also tried changing the htp and ltp setting Oh sorry I read that wrong, I don't have a solo option on mine, and I can't update the desk as the update been taken down
jw-lighting Posted September 13, 2016 Report Posted September 13, 2016 Oh sorry I read that wrong, I don't have a solo option on mine, and I can't update the desk as the update been taken down Hmmm. Now, I'm not sure at all if there is a Solo option for the UDKs. The playbacks have one. As a workaround you could use a playback instead.
luke1307 Posted September 14, 2016 Author Report Posted September 14, 2016 Ok that's great thank you for your help. Jon is a solo option for the Udks possible to add please
Jon Hole Posted September 14, 2016 Report Posted September 14, 2016 Jon is a solo option for the Udks possible to add please It's on the list :-) Jon Hole linkedin.com/in/jonhole
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now