Jump to content
Vari-Lite Controls Support Forum

Recommended Posts

Posted

I have used the eDMX4 Configuration utility to set my eDMX4 PRO IP Address to 192.168.0.1, Subnet Mask to 255.255.0.0, which is my FLXS48 settings, Default Gateway to 192.168.0.1 , then connected the eDMX4 PRO to my FLXS48 network port. In Setup > Universes > IP Address I have set Static IP Address. I have patched a device to universes 1, 2, 3  and 4 in Art-Net 4 settings, but I do not have any data to my eDMX4 PRO yet and none of the four port led's are lit. Any suggestions on what step I have missed out please ?

eDMX4 PRO User Manual (EN).pdf

Posted
15 minutes ago, DALX said:

I have ... set my eDMX4 PRO IP Address to ... my FLXS48 settings

You can't have two IP addresses the same on the network... you need two unique IP addresses, but that are within the same subnet.

So, for example 192.168.0.1 and 192.168.0.2

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.