[Newbie questions]

Hi All,

I know I can go to Zero88 support, but I thought posting here might help other newbies like me. Just to be clear, I'm newbie lighting tech for a village hall theatre group running 28 fixed lights (through Chilli dimmers) and a couple of LED par 64s controlled by a Solution desk. We do hire in Fixtures when there's a need.

I've done the day course at Cwmbran (highly recommended) but there's quite a lot it, and the manual, doesn't cover. I'm finding it difficult to understand why & when (not just how) you'd use a feature and particularly how to best program our fixed lights. So here goes ...

 

1) Patching my LEDs, after I've done the first one, is there a quick way to copy a second fixture of the same type to another MFK or do I have to patch each fixture individually?

 

2) How can I create a Group of dimmers (I get an "All Dimmers" group from the Auto Menu but I want to group some of my dimmers - say the Cyc Floods - to control them as a unit)

 

3) My Panto (Jack & the Beanstalk) needs a lighting effect whenever the Giant is about to speak, all the stage lights (i.e the Cyc floods & some of the lights illuminating the stage, but not the profiles on the main characters) should "shudder" & then dim to, say 70%.

What's the easiest way to create this shudder effect? (I'm thinking a chase, but I suspect I should be using palettes to apply a quick series of intensity changes to a group of dimmers? How do I do this, and how can I apply the same effect in another scene when my stage lights are at different intensities?

 

Probably enough for now; I expect there will be more to come!. Not sure if this would be better split into separate posts.

 

Simon

[Cross patch DMX?]

Sorry for not updating this, in case anyone else is searching the forum. The answer was as Jon suggested, the DMX addressing on one of the Chilli racks had been reset, so 2 racks were set to the same DMX channels.

S.

[Can't see User Fixture file]

Any reason why my Solution can't find a fixture file on my USB stick?

 

I adapted a fixture file to create one for a LEDJ Alu Par 64. Put it on the same USB stick I used to backup show files. When I try to load the file it doesn't show up.

 

File attached. LEDJ DMX spec is at prolight.co.uk/images/media/LEDJ110/LEDJ110-um0.pdf

 

Any suggestions?

S,

 

Sorry, not sure if this should be here or in Fixtures section.

LEDJ ALU PAR 64.ift

[Cross patch DMX?]

Hi Jon,

Thanks for the swift reply. I found out this evening that the hall has been used by a pro group shooting a video so I'm beginning to suspect they've been mucking about with the addresses as you suggest. Had another read through the Chilli manual online (Page26) and I think I understand a bit more about setting the channel addresses (Top Menu >> DMX Controls >> Set DMX Patch).

 

It doesn't specifically have "View" instructions - if I enter a channel number, will it show me what DMX address it is currently set to?

 

Do I assume the channels are numbered top to bottom of the rack? I'll need to set each channel individually to match the wiring number. (sorry to ask daft questions, but it'll be late evening before I get another chance to sort it out and you'll all be a-bed!)

 

S.

[Cross patch DMX?]

Hi,

Firstly, I'm a very newbie to this so go simply and slowly with any advice and excuse any wrong vocabulary.

 

We have a Solution control desk linked to suite of Chilli dimmers (about 30 dimmers in 2 racks and a 3rd rack with straight switches). All our lights are old non-fixtures (mix of fresnels, Pars and spots) and the Chilli dimmers and their associated power circuits are all numbered so no confusion about connection between control fader >> chilli dimmer >> light. Setup has worked fine for a couple of years, certainly when I last used it for a production in January. So far as I know it's not been touched since.

 

Today, I found that some faders on the control desk are working the wrong lights. e.g. fader 1 brings on light 1 and light 26. These are on different physical lighting bars so no confusion about which sockets they're plugged into.

 

Just in case, I installed the current ZeroOS upgrade (to 7.8?) but that had no effect.

 

 

So:

1) Can't find instructions in Chilli manual to set/confirm DMX channel for each dimmer in the rack.

2) Lots of instructions for patching fixtures for the Solution but couldn't recognise anything to help me.

 

How do I diagnose what's wrong?

 

Thanks,

Simon.