ryandell Posted November 20, 2006 Report Share Posted November 20, 2006 hi, is it possible to program a chase into the alcora board as tonight i am using it for auditions and want to use a flash chase for it. Any help on how to would be kind thanks ryan Quote Link to comment Share on other sites More sharing options...
kgallen Posted November 20, 2006 Report Share Posted November 20, 2006 (edited) You can program a memory as a sequence (which is I think what you want).In program mode, press and hold the Memory Type button until the LED changes to Sequence. Setup a stage picture, press Program. Press Add Step, program the next stage picture, press Program. Continue like this for all steps in your sequence. If necessary you can insert steps between already programmed steps using Add Step.The manual is available on this website if this explanation is too terse (same for MkI and MkII Alcoras):http://zero88.com/support/index.php?/Knowledgebase/List/Index/50/downloads See page 24You can copy and paste individual steps (but not a whole sequence). See page 28.The direction of the chase is set when the chase is run. See page 33.Good luck. Edit: Update manual location. Edited January 21, 2015 by kgallen Quote Link to comment Share on other sites More sharing options...
ryandell Posted November 20, 2006 Author Report Share Posted November 20, 2006 hi, thanks very much this will come in handy, thanks ryan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.