Wobs Posted August 9, 2013 Report Share Posted August 9, 2013 The new Showtec XS-2 Duo (identical in spec to the Chauvet Intimidator) is a two-headed moving fixture with a common set of DMX. Can anyone help me with creating a common dimmer control for two addresses (each head has a dimmer with a separate addresses on ch5 & ch6). Personality can be 10, 17 or 20 channels but I have opted (for simplicity for the 10 Ch). I have tried a variety of options but always receive the same message that the fixture may only have one brightness parameter and not figured out a work-around. Thanks in anticipation for your thoughts. (.ift attached) Showtec XS2 Duo 10ch v2.ift Quote Link to comment Share on other sites More sharing options...
KWR88 Posted August 12, 2013 Report Share Posted August 12, 2013 struggling to find the manual on this could you PM me it on the address below. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com Link to comment Share on other sites More sharing options...
Wobs Posted August 13, 2013 Author Report Share Posted August 13, 2013 Hi Keith. The manual is not published online, the equivalent (and identical spec) is here from Chauvet. Thanks in anticipation for your help. Quote Link to comment Share on other sites More sharing options...
KWR88 Posted August 16, 2013 Report Share Posted August 16, 2013 Hi As promised fixture for both the XS2 Duo and Intimidation Duo attached for anyone who needs them. Due to the way this works there is a single master dimmer, this has been set up as virtual dimmer, there is an individual dimmer in beam shape for each head. Note. The master dimmer will not appear on the original Frog or Illusion range as these do not support the virtual dimmer function. XS2 Duo.ift Intim Spot Duo.ift Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.