DMX output 3 pin nor working after software update to 7.11

[Holger]

After updating from 7.9.4 to 7.11 the DMX 3 pin output does not work anymore. (Before, it did.)

Can this be a software problem? Are there any new settings to control output via DMX 3 or 5 pin?

@Edward Z88 I tried all the stuff in real (with connected lights) on the weekend and I got this problem that the 3 pin DMX does not work anymore....

[KWR88]

The settings for the output have not  changed but it is possible if you have load a show file from 7.9.4 that has only one universe patched it has only enabled output 1.

If you go into setup universe, check universe 1 has both Output 1 and 2 selected not just output 1.

[Holger]

Thanks!

Could be the problem. May you suggest what I should do with the name? (See attachments)

DeskUniverseOutput_a.jpg - Settings

DeskUniverseOutput_b.jpg - After Add

DeskUniverseOutput_c.jpg - After click on Output

DeskUniverseOutput_d.jpg - After entering 2 as in your screenshot

I will test is today in the evening.

 

[KWR88]

As you have done enter the number2 and on the next screen select the "use on this desk universe instead" option. That should then give you the name Output 2 as per my original image.

[Holger]

After renaming new Output to Output 2 it worked! Thanks!