GLX
-
Posts
256 -
Joined
-
Last visited
Posts posted by GLX
-
-
STAIRS, LOADS OF STAIRS
-
What kind of units/lamps have you pluged up the ar*e of the desk :?:
-
That wagging tail could be used to keep the power supply cool, HOT HOT HOT 8)
-
On the new desk include two drawers to house the keyboard and tft monitor, which you could :!: SELL :!: :idea: as an extra
-
Burn a few copys and post it to whoever will pay
-
I was wondering where I got that T-shirt & free leap frog from.
-
All the lamps are out on a dry hire till monday, I'll try it again apon their return.
-
Page one, subs 1 to 6 had generic data programmed straight to them.
Turned the desk off, returned turned the desk back on and started to program the movers via the control wheels directly to the subs, page one sub 7 to 12, and pages 2 &3 subs 1 to 12.
When finished went to play back the subs, all fine but for the generic data on page one subs 1 to 6. All the generic stuff had been replaced with the last programmed mover look. ie what was in sub 12 page 3 had recorded its self onto page 1 subs 1 to 6.
Before programming all the subs, memorys, pallets were wiped clean. I recorded the generic data over the affected subs again and it worked fine, weird.
-
Loaded ver. 9.6, did a show yesterday same fault.
Programmed the generics directly onto the first 6 subs page one. Turned off the desk went to get the nose bag, returned powered up everything started to program the movers directly to the subs, when finished playing, went back to check everything and FU@K all the generic memorys has the last programmed mover state recorded on them :cry:
Powered off/on the desk and it was still the same, the last recorded mover state had copied itself over ONLY the first 6 subs where the generic info lived.
Any ideas cause my heads wrecked.
-
While programming a gig tonight onto the subs page one, after reaching sub 12, I went to play back the subs to check everything, DISASTER all the subs had the same duck effect stored on them 8O .
What the duck happened. All the fixtures were homed after each sub was programmed. I'm running the desk in 9.2, any ideas :?:
-
Jeff is that you?
-
Stick your sharpie or pen across the sub faders and move up/down, works a treat
-
There's four Martin Kryptons, four mac 250+'s, 3 mini scan hpe, 2 GLP 250 colour, 24m 12" box truss, one 12 way dimmer 12 par 64 1k's and 2 colour faders, and one martin magnum pro 2000 on smoke duties, and of course a Fatfrog.
-
MUCK SAVAGE:
A word used to describe most lead singers,messy punters,people who just get in the way, ya know those last punters who sit under the LX and sound multi during get out.
-
You would think that, But there is a lot of muck savages out there.
-
As regard to flashing random fixtures on the mac range,role the strobe channel to dmx 170,
-
Whats a tone death child?
-
The chase speed thing HAS been sorted in the new update,read the release notes.
-
Take the mono out from the sound desk, this frees up the aux. for monitor returns effects etc... Most noise boys dont use the mono out during shows so ask nice, they're an odd bunch.
Set your chase thingy to bass and now your in debt to the noise crew "not a nice place to be"
-
Yea, you can save the movments to the memorys,subs and pallets..very handy
-
Just select the fixture during the show and role the colours/gobos via the wheel
-
Quick transfer!
-
Cool didn't know that
. Agh these frogs are just full of surprises, keeps the brain alive!! -
Unplug the mac's from the dmx :wink:
Vacation time !!!
in General Discussion
Posted
To busy working
, got to make money to buy new zero toys 