Haytech
-
Posts
371 -
Joined
-
Last visited
Posts posted by Haytech
-
-
This will then reset the code back to 0000. You can then change it to whatever you want, now you have the current code.
However if the desk is currently locked, then get in touch with Zero88.
according to that it is possible to get the original code even when desk is locked: by updating the desk operating software 'DOS' *lol* after the update it will setted back 0000 - this is only a assumption due to most of IT processes I know.
-
I would go for unplugging the unused fixtures ...
But if you can get a big green plant,
try hiding your green friend beneth it ...
hire Sam who says
"Touch the desk and I get my leatherman out and slice you up. Did you f§ux&yz!%ing get that??
Thank You for your co-operation in this matter and know enjoy the show"
-
D´oohh
that really sucks - even when this falls back to the major company.
comfortingly to the best of my knowledge the huge light installation was a great deal
-
Thanks Dwest
and welcome to the forums ...
Then use super user to do a "clear all" followed by a "reset".This should give you a factory configured desk.
This I have done before a thousend times
I´m not sure but I think that the internal memory is defective
I try to charge the accumulator for about 24hrs and
run a test chase pattern ...
Thanks again for your opinion on this problem.
-
Hi,
what about a SOLO disable ? I think MA has a similar function on lightcommander could be done in desk setup: SOLO on chan LED is on SOLO off: chan LED is off - This function should only used by HTP channels.
Should be the same thing...
-
Hi,
We have got a XLS desk also in our hiring gear but it is a little ill, will say it has a headache :? It loses all its memories after about one day ...
and while a show is played only on Chase 3 a problem is counting the steps
I have programmed about 5 steps per memory and while running, it counted up to 99 steps then disp says NL. or ER.
I changed the internal memory accumulator but it didn´t bring the desk back to live ... I don´t want to scrub such a simple to use and good lighting item.
TIA
-
Hi,
I like the circles with cyc in back did you have any projections pipo ?
-
I am afraid you can't renumber a cue list on the Frog range. You can do this on the Illusion. The only solution is a point cue, a jump or copy cues one by one to move them all up one.
You should have made a security copy of your show before copy each mem ...
I found out that it is a little tricky to copy about 100 memories step by step
I would go to point the memory as mem 4.1 ... it´s the same thing as mem 5
you don´t have to do the book, only change cue 5 to cue 4.1 no "jump" will be required anymore.
cheers
-
Hi guys,
It´s just a sugeestion / question of posibbility
When a desk is in palette lock mode half the screen is empty so my sugestion is to show the Output screen in the other half of screen to see what is going on.
-
I never mind the colour of the desk - I think nobody is interested really.
By the way each person who has seen the desk mentioned the cool design ...
-
Hi
As all Zero88 desks I know have these attack modifier key
I didn´t realize that this thing missed in the manuals
even though I had read it twice
-
Would it work or would it look a mess?
depends on lamptype and position in your rig...
-
I´ve never seen one, I´am sure Zero had done very good work.
-
DVD Ram 8O could be cool viewing videos playing games and copying stuff while boring work
-
Thanks Yves
we will see ...
have fun on friday ...
-
So your laser has to be ethernet controlled or have you got an additional controller card esp. for the laser ?
I ´am curius about that because I´ve never haerd about ethernet controlled lligting things exept the iLight Products and eCue Media engine ...
-
Thanks again ...
someone has switched on a light above my head :idea:
Why isn´t there any documentation of these utilities ?
-
More ways of backing up shows (CD-RW) and a parellel port for a printer
CD - RW ? have you think about the bus system and software needed to write and read CD ROMs all this things have to be invited for the Frog Desks... these problems apart is a CD drive a little overdressed to put 700KB things on it ...
I think it is not a very big problem to have motorfaders, but why the duck a desk should have a expensive touch screen ? It´s needless if we have a cool interface on screen and some softbuttons....
-
Hi Yves,
very nice LASER ... how do you control it ?
is there a computer with controlling software or
has it a DMX interface ?
-
Hi again,
Why of all original fixtures the wheel groups aren´t setted up ?
Is it because frog sorts the fixture functions automatically to the wheels ?
-
I'm mortified :oops: that option should attracted my attention before...
but sometimes I´m not to see the wood for the trees
Thanks K-Nine for leading me through the woods
-
Is there a way to get the fixture data out of the original Zero88 one ?
my Type Fixture Editor says there is an error opening gft11_00.ift
"This is not a user type fixture file"
I´m looking for a way to reconfigure Fixture type files this should be faster then making a new one every time I come in contact with new fixtures.
TIA
-
Very good idea sam !
I was searching a way to get extremly expensive LED goosneck light for my desk. But I put a XLR to the USB - gooseneck and it works fine without buying a new keybord ... the only thing to think is the USB need´s about 5V 2W and XLR provides 12 V !!
-
Hi
Just as a quick question about keyboards would a wireless keyboard work??I tried a logitech wireless desktop
and it works fine ...
Im sure other systems are running too.
Go Previous/minus
in Frog Range MK1
Posted
Hi dougalzeb
there isn´t something like GO+ GO- on the desk the only thing you can do is to press the - button twice before pressing go.
cheers