Manual Fade and Go Fade in Cue list + BUG ?

[Transversales]

2 things:

Is there a way to mix manual fade (2 way) with Go (fade) ? Using the manual fade seem to desactivate permanently the Go button.

After using a manual fade on a cue list, how to revert to another fader mode (HTP or the other manual fade) without deleting the cue list, turning on/off the FLX S48 or making a save/Load of a file.

Some few other note:

if after using manual fade you press CLEAR+GO, the fader become desactivated (Go is still not responding), and trying to change the fader mode, make appear a new line at the begining of the cue list, with the Q# "--".

The same things could be reproduced on any MFF.

This was tested on firmware 7.9.7 and 7.9.8 on a real bord, and in the phantomOS.

 

[Edward Z88]

Hello,

9 minutes ago, Transversales said:

Is there a way to mix manual fade (2 way) with Go (fade) ? Using the manual fade seem to desactivate permanently the Go button.

No there isn't - if you choose to use the Manual Fade options, the fader advances you through your cues, rather than the Go button.

10 minutes ago, Transversales said:

After using a manual fade on a cue list, how to revert to another fader mode (HTP or the other manual fade) without deleting the cue list, turning on/off the FLX S48 or making a save/Load of a file.

After operating a cue list with Manual Fader 1-way or 2-way, it cannot simply be changed to a different Fader Function. Therefore if you do wish to operate the cue list with a different fader function, change the cue list to the fader function you need, and then copy it to an empty playback fader. The new copy will then playback with your newly chosen fader function.

13 minutes ago, Transversales said:

if after using manual fade you press CLEAR+GO, the fader become desactivated (Go is still not responding), and trying to change the fader mode, make appear a new line at the begining of the cue list, with the Q# "--".

The same things could be reproduced on any MFF.

We are aware of this issue, where after manually releasing a Manual Fade playback it can no longer be triggered. This is logged on our software tracking system as reference number ZOS-5803.

If you have any questions let us know.

Edward

[Transversales]

thanks.

11 minutes ago, Edward- Z88 said:

We are aware of this issue, where after manually releasing a Manual Fade playback it can no longer be triggered. This is logged on our software tracking system as reference number ZOS-5803.

I'm glad that it's already in your bug tracker. I hope solving this bug could re-init the fader mode at the same time. This could prevent the use of copy/paste too, since it's counterintuitive to not be able to revert back.