Uriahdemon
-
Posts
230 -
Joined
-
Last visited
-
Days Won
6
Posts posted by Uriahdemon
-
-
On 1/18/2019 at 8:46 AM, Edward Z88 said:
Information on how to connect your laptop to give you an external screen can be found here...
Morning all. Looking to use another external monitor (perhaps using a laptop) with my desk (FLX). Unfortunately the link is now dead...... Is anyone aware of a new/updated one please.....??
-
Hi Ed, I reformatted the stick and it is now currently working fine. A bit weird as I always have to USB drives both mirroring each other (just in case). I have used this loads of times in the past. Hey ho.... at least it works now. Thanks for your help.
-
Thanks Ed, I have formatted the stick but will try again. I will also have a look at the system info you mention this evening and get back to you.
-
Morning folks.
I was doing a bit of setting up last night and took a couple of USB sticks with me to load on the desk. One worked i.e. the desk seen the contents, the other did not work i.e. no contents at all seen.
They are both Sandisks one 8GB the other 4GB and both formatted to FAT32.
The one that did work (which I have had no issue with since first use) was the 8GB stick.
Does anyone have any idea why the 4GB stick would not work. It is basically a back up for the other and contained a full copy of the 8GB stick........???
-
23 hours ago, Jon Hole said:
Hi Uriahdemon,
Can you not "scroll" (press and swipe left) the tab buttons to see the rest of the P/T Grid? After that tab should be an "Effects" tab which will provide you with the parameters that you're looking for.
Jon
Indeed and thanks John. I am that used to the FLX and using a mouse with PhantomOS. It never crossed my mind. Keith was also very kind to respond to a support email I submitted. All good now !!
-
It seems to be my LCD Display on S48 Phantom. The tabs I can see only go up to mid way through the Pan/Tilt Grid. I have tried resizing the LCD window and also Win10 Display Settings but nothing helping me get the full picture including the 'Effects' tab.......??
I have provided a link to a screenshot which will explain it better.
https://www.dropbox.com/s/dvovscojiox8p77/S48 Phantom LCD Screen Shot.jpg?dl=0
-
Hi Dimitri,
I have an issue you may be able to help me with please. I posted on it yesterday but some of your post here helps.
I see in one of your images that the top of the S48 window you have an effects tab which brings in speed, size, offset and rotation encoder parameters.
I am using S48 Phantom and my tabs only show over to Pan/Tilt Grid i.e. no Effects tab.
Can you help on how to get this to show please....??
-
16 hours ago, Uriahdemon said:
Hi,
Can anyone please let me know how you can get to the effects, speed, size and offset parameters on the S48....??
Unfortunately I cant seem to get them up on the encoders at all.
TIA
Or indeed is there the capability to do this on the S48...??
-
Hi,
Can anyone please let me know how you can get to the effects, speed, size and offset parameters on the S48....??
Unfortunately I cant seem to get them up on the encoders at all.
TIA
-
6 minutes ago, kgallen said:
Auto palette generates the default colour and gobo palettes - what you get when you press the button in the middle of the touch screen when you’ve got a fairly fresh desk.
Palette just means one you recorded yourself eg RECORD -> COLOUR
Thanks KGallen
-
6 hours ago, Edward- Z88 said:
If you have a small Windows laptop (touchscreen even better!), get this connected to the console over Wi-Fi, and walk round the venue with it patching.
How is this done please Ed. I can connect up my IPAD to the desk via wifi and use ZerOS remote to trigger playbacks. I am not sure how to do this....??
6 hours ago, Edward- Z88 said:Once patched, create all your auto palettes and groups as a base.
What is the difference between a palette and an auto palette....??
-
Thanks Ed, thats the stuff I need and seems I have plenty of homework now.
No doubt there will be more questions once I have had a read and a play.
I look forward to the training session.
-
Thanks for the info Ed and I have just registered for the training.
What is the workflow you use to program i.e. pallets and groups what and when etc....?
-
Thanks KGallen, yes I dont know as yet but interested in trying it out. I have a visualiser so will have a try with that first to see how it maps across.
I really dont know what movers I will come across when this is up and running so need to find some way to changeover quickly and efficiently.
-
Hi,I have a Zero88 FLX control desk with two wings.
I have been using it for a few years now with my own rig. In preparation for some potential work next year I need to set it up for maximum flexibility and capability. There is a chance the venues will be bigger and I will be using a small ground package and hooking into the house rig. I have done this in smaller venues and coped by getting fixture specs , positioning and DMX addressing info. Some venues were really good with a tech spec some not.
So the info I need some help on would be to help in a situation when you get to a venue with no tech spec info at all. How do you set your desk up, what are the work flows used for fixture selection groups, positioning etc.
-
Hi Ed,
I tried your suggestion and the 'Test' Mode showed no issue with the faders. I did visit Mr Screwfix yesterday for the can of air duster and applied that afterwards also
Fingers crossed it has not occurred again. I really dont know what this was.... very weird but hopefully that is it now.
Thanks very much again for your help (especially at the weekend) hugely appreciated.
Rgds
Mac
-
Thanks Ed, I will give that a try.
-
Hi everyone,
so while getting things ready for my first piece of work coming up soon for quite some time the hand of doom has visited.
Faders 1,2 and 3 are acting up. If I raise 1 the intensity on 2 also raises. I can also touch fader 2 while it is in the low position and the intensity flickers. Fader 3 intensity also flickers and changes intensity outputs.
Has anyone seen this before please. I have a week to get this sorted ? -
Thanks very much Ed, it was the ‘Double Tap’ I was missing !
-
Hi,
Can anyone please recommend a quick way to change an entire universe to an alternative or a number of fixtures to an alternative universe at once....??
-
17 hours ago, Davidmk said:
And that sticks OK? I'm impressed! Have you got a link to the film you used?
Yes seems just fine....
Here is a link to the pix I have put together for it. Includes info on the film and have also included the template.
https://www.dropbox.com/sh/7y2lwf4pmpfcc4f/AAAiYduOhCyycuGAQGW2-3Mva?dl=0
On the film this was some stuff I have had lying around for years but also just ordered some water resistant film. Here is the link for that:
Give me a shout if you have any more questions.
-
8 hours ago, Davidmk said:
That's brilliant. I'd look at doing something similar except I regularly have to carry my desk up a spiral staircase so I have to keep it down to something I can lift with one hand.
When it comes to spiral staircases that will be the ‘B’ Rig.... 😌
-
Thanks Ed,
from arrival time to setting it all up is 5 mins so all good on that side of things.
On the other at least I have some redundancy ... just in case !!
-
Good afternoon all.
I have spent a bit of time with Swan Flight (who have been fantastic) designing and building a case for my FLX rig and thought you may appreciate a pic or two.
I did this as it saves carrying several different cases around and it also helps with setting up and breaking down time. It caters for the FLX, 2 X Wings, Laptop (Running PhantomOS as a tracking back up), Touchscreen, Ethernet to DMX Gateway, DMX Splitter and a MIDI trigger. Of course there will be situations where I cannot place the case where needed so will use a separate touchscreen, Wing and Laptop via a small Ethernet to DMX Gateway but again that is all in the case.
I thought you may appreciate a couple of pix.
PS.... I am lucky enough to have a transit to cart this around.
Link to more Pix: https://www.dropbox.com/sh/3etf147033chkrt/AADzDoSaUxr8vgbvn3EVOs28a?dl=0
ZerOS 7.10 Released
in News & Announcements
Posted
I have got to say I love the PhantomOS interface. Much easier to work on. Thanks folks !!.