Petera Posted January 14 Report Share Posted January 14 Is there a log file in a solution which records time loaded and zeros version? Quote Link to comment Share on other sites More sharing options...
Simonkbike Posted January 14 Report Share Posted January 14 For clarification, do you mean a log of when the zeros version was loaded? Simon. Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted January 15 Report Share Posted January 15 13 hours ago, Petera said: Is there a log file in a solution which records time loaded and zeros version? When you save a show file, this will be saved with a timestamp of the console's date/time, and will also include the console's current software version information. Is this the information you are after? Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Petera Posted January 16 Author Report Share Posted January 16 The idea was to check when the solution was last booted up or reloaded. Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted January 16 Report Share Posted January 16 4 hours ago, Petera said: The idea was to check when the solution was last booted up or reloaded. In ZerOS there is no information that logs the system time of the last boot up. Would you be able to explain why this information might be useful in your situation? Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Petera Posted January 17 Author Report Share Posted January 17 Hi Edward, Sometime ago our solution rebooted mid show (not during a cue change). We now have an flxs but decided to to check out the solution. All connectors and pcbs etc have been reseated and it seems stable, but for testing the idea was to leave it switched on and check if it had reloaded. Quote Link to comment Share on other sites More sharing options...
KWR88 Posted January 17 Report Share Posted January 17 Hi Petra, When it reboots does it generate an error messages and ask you to save a debug file or does it come back in as if nothing has happened. When i have been looking for odd issue like this, i have set up an automated cue stack that the first cue needs a button push to trigger the next but it then runs through a set of cues and loops back at the end to one of the earlier cues and contiunes to cycle round the loop. If you then diasable to recovery mode if the power goes off it will wait at cue 1 until go is pushed again. Have a look at the attached file. Loop Test.zos Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com Link to comment Share on other sites More sharing options...
Edward Z88 Posted January 17 Report Share Posted January 17 1 hour ago, Petera said: Sometime ago our solution rebooted mid show (not during a cue change). Sorry to hear that. Do you know what software version the Solution console was running at the time? Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Petera Posted January 17 Author Report Share Posted January 17 Hi Keith & Edward, The couple of times it rebooted it continued as if nothing had happened! Unfortunately I don’t know the zeros release buy can say it was at least two versions ago. Thanks for the cue list I will try it next week when next on site. Peter Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted January 18 Report Share Posted January 18 11 hours ago, Petera said: Unfortunately I don’t know the zeros release buy can say it was at least two versions ago. If you're not running the latest version, I'd recommend updating your console's software. ZerOS 7.14.2 is currently the latest version, available from the webpage below... https://www.vari-lite.com/global/products/zeros-software Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.