terryb Posted October 23, 2019 Report Posted October 23, 2019 I am trying to update the fixture library on my TLXtra from 36 to 38. The new library starts loading normally but just before completion 90% it fails with error code 108. Thoughts please?
Edward Z88 Posted October 23, 2019 Report Posted October 23, 2019 Hi Terry, If you are getting this error, please follow the guidance in the article below... http://support.zero88.com/1540160811 Hope this helps, if you have any questions let me know. Edward Edward Smith Formerly: Zero 88 Product Specialist - Email Support Currently: Obsidian Control Systems Product Specialist
terryb Posted October 23, 2019 Author Report Posted October 23, 2019 This desk has always been a nightmare to update! I cleared the user files. I tried to load the blank file and got a wrong file type error. I am still getting the Failed 108 message at 95% Just to confirm I am loading gft38_ft.ift I once managed to pick up a rogue file from the website at one point in the past.
Edward Z88 Posted October 23, 2019 Report Posted October 23, 2019 Hi Terry, If you are currently running fixture library v36, you'll need to load in the "BlankLib.ift" library file before loading in gft38. Once you have downloaded the blank library file from the article, are you extracting the file to the root of a USB stick? If you are simply copying it, it won't have been unzipped, and therefore the Jester won't be able to read it. Let me know how you get on. Edward Edward Smith Formerly: Zero 88 Product Specialist - Email Support Currently: Obsidian Control Systems Product Specialist
terryb Posted October 23, 2019 Author Report Posted October 23, 2019 Ok I solved it! I needed to do the OS upgrade from 4.0 to 4.1 first. The blank file then loaded and then the new library. Thanks for the info about the blank file. Thanks Edward
Edward Z88 Posted October 23, 2019 Report Posted October 23, 2019 Hi Terry, Great, glad to hear you solved the issue. If you have any questions let us know. Edward Edward Smith Formerly: Zero 88 Product Specialist - Email Support Currently: Obsidian Control Systems Product Specialist
Tim Molyneux Posted yesterday at 02:13 PM Report Posted yesterday at 02:13 PM Hi, I have bought a pair of 19x15 LED Moving heads from Amazon 2Pcs 19 LED 285W Wash Zoom Moving Head, RGBW 4 in 1 Professional Focus Dye Stage Light with Light Strip and 4 Control Modes for Party KTV Concert Music Festival Christmas Wedding Celebrations : Amazon.co.uk: Musical Instruments & DJ and I have created a fixture for it using the Zero88 software but my Jester 24 ML is not recognising the file type when I attempt to update the library. Any suggestions? Thanks, Tim
kgallen Posted yesterday at 06:27 PM Report Posted yesterday at 06:27 PM Did you use Fixture Tools 2.6 and save an ift file? It should just work… Can you elaborate more on what you did? Maybe upload your fixture file here and we can take a look. I see you started a new thread - maybe we can continue on that (but please avoid double-posting, you won’t get help any quicker…).
Tim Molyneux Posted 7 hours ago Report Posted 7 hours ago Thanks for the reply. I started the new thread when I noticed how old the previous one was - I'm delighted you are here. I have attached the 2 files I created using the software on this link (2.6): https://vari-lite.s3.eu-west-1.amazonaws.com/software-firmware/zero-88-fixture-tools-2.6.zip It is very possible I set one of the parameters incorrectly - I am not (by any means) a lighting expert. I have also attached the channel descriptors for the light in case you are able to spot any errors - assuming you are happy to give the time. Thanks again, Tim LeLight LED Moving 17ch.ift LeLight LED Moving 25ch.ift
mikeb Posted 4 hours ago Report Posted 4 hours ago Hi The 17ch IFT seems empty and the 25ch IFT only shows 4 DMX channels with just a dimmer. I'll look to create a single IFT file that contains both modes
mikeb Posted 4 hours ago Report Posted 4 hours ago Hi Give the attached a go and let us know how it goes LeLight LED Moving.ift 1
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now